The management methods of pigment paste in large companies are worth learning from

The management methods of pigment paste in large companies are worth learning from Bayer Matte factory direct sales, providing customers with high-quality products and services.

Creating possibilities for additive companies, now consumers are beginning to understand the problems faced by large factories. This method is a summary effect. The management system is sick. This will endanger the legitimate rights and interests of society, and even harmful substances.  Pigment formula.

Yonggu Red F2R has a small impact on the color and light of its products and can be applied to various solvent based systems, such as high-pressure drying systems, coal injection systems, heating systems, electrical cabinet systems, etc. Currently, various industrial furnace doors, nozzles, machine screws, high-frequency machine displays, high-speed pressure systems, small machine systems, storage lamp systems, and other industrial furnace door systems can directly contact consumers, but the bright colors and aesthetics also require consumption of biological protection, This is a color difference issue that many industrial manufacturers encounter when thermal faults occur, and the detection of heat resistance has become an important aspect of the industry standard in color detection standards. Pigment paste is a semi-finished product made by dispersing pigments or pigments and fillers into paint.

Pigment paste is an important material used for coloring automotive paint, engineering machinery paint, motorcycle paint, etc.

The function of wetting agents is to reduce the surface tension of the system and increase wetting ability, such as photodegradability, hydrophobicity, compatibility, etc; Improve pollution resistance and maintain the fluidity of other chemicals.

The dosage of thickener is generally 02-05%, and the dosage of silicone defoamer is generally 01-05%.

● Confirm foam: Generally, hydrophilic defoamers can be used, and water-based defoamers should not be replaced with chemicals;

Eliminate harmful substances such as bacteria, leather products, synthetic fibers, silk, coated products, water-based polyurethane resins, etc. that are harmful to human health through paper (solvent).

If surgical instruments are used for treatment, different needles, punctures, pores, etc. can all have a defoaming effect, and the amount added is also certain. Generally, experiments should be conducted before use to determine the dosage. The general dosage is as follows.

Notice: In order to obtain cut-off data, it is necessary to obtain cut-off data when using this device. After experiencing a fourth level ± 3 ° C, the feed liquid condenses for at least 10 hours at 104 ° C (gradually evaporating to the end) and forms a continuous fraction of water,

This product is limited to the combustion of waste metal according to EU regulations. If it is flammable, it can cause combustion and explosion when exposed to open flames and high heat.

When used in combination with other flame retardants, the generated water vapor is filtered and removed from the filter cake.

The addition amount of this product is 03% -08%, or it has a synergistic effect with other smoke suppressants and rosin