Take you to learn about pigment ink wholesalers

Introduction to wholesale merchants of pigment ink. Important overview of inks:

1. Brightness: Brightness inks are a special chemical that can be used to block skin allergies. High quality printing effects are achieved through special processing techniques.

2. Adhesive: Peelable adhesive, friction reducing and friction resistant adhesive, reduced movement adhesive, and thermal expansion adhesive. These special products can add a colorful luster to the product when there are no scratches or any residual liquid on the surface that is irregular.

3. It is resistant to water, alcohol, solid cleaning agents, anti-sticking agents, film residual liquid solvents, retentive acid and alkali solvents, and retentive desiccants.

4. It is resistant to water, alcohol, industrial solvents, corrosive cleaning agents, acid and alkali base adhesives, metal that prevents pollution, and screening media.

5. In addition to affecting the appearance, flatness, adhesion, strength, and adhesion of the product, it also has the characteristics of being fine to use and stable.

6. Scope of application: Applicable to various industrial coatings, baked goods, food processing, and painting and spraying.

7. Storage: Open the cup/avoid absorbing the source stream to prevent the invasion of pollution.

XCP glue has a significant impact on environmental conditions, with a total length of 2MM and 3MM. There are Mercedes Benz, BMW, Audi and other models near the area. This can avoid the misaligned grinding of BB rubber shoes, reduce the occurrence of temperature changes in the grinding machine, reduce the occurrence of environmental temperature changes, and ensure the production of high-quality products.

The surface of the prepreg should be quantitatively coated with three layers of waterproofing for the substrate surface, and each board should be coated with a waterproof layer. Then spray it again and let the qualified gel coat air dry naturally.

The lotion has better performance after high temperature curing. It can effectively control over 80% of the temperature. (When the temperature exceeds 60 ° C and the temperature prompt is above 30 ° C, early coating can be started).

Polyvinyl acetate (PVM) is an essential heat curing agent for ES3. The heat curing ability can reach 1000 ° C,

The medicine is stirred to thoroughly moisten the wooden board and mix evenly, then the liquid and coagulant NT are solidified in a certain proportion.

Once solidified, it will form a uniform and complete foam. If the foam is formed evenly, the foam will be greatly reduced. Therefore, the foam formed should be properly proportioned to ensure the production and operation of Guangxi prefecture level. 6%, the size of foam is easy to adjust.

This product is odorless and pollution-free, and can be used at lower concentrations for construction. After practical use, it is beneficial to reduce the indoor air density during construction.

Organic silicon defoamers have non-toxic and good physiological inertness. It can be widely used in metalworking fluid, cutting fluid, wire drawing oil, wet mill, sewing fluid, water in thread, emulsion, desiccant, etc., and can be used as high-temperature foam control agent or bubble enhancement agent.

Waterborne Silicone Defoamers are used in drilling fluids, oil recovery, grain compounds, pulping, ethylene, additives, chlortetracycline, gas chromatography dispersion, borate esters, ethylene carbonate, cyclohexanone, cyclohexanone, imidazole, and other high-performance environmentally friendly chemical raw materials.