Take you to learn about organic pigment wholesalers’ home decoration colors.
Characteristics of water-based organic pigments and dyes: They have excellent weather resistance, aging resistance, water resistance, acid resistance, and chemical stability, and are suitable for high-end architectural coatings, industrial coatings, decorative coatings, and daily chemical applications.
For organic pigments, good flocculants should be produced by fixing and revitalizing agents, while water-based organic pigments and dyes mainly rely on fixing agents.
The quality of the sealant can affect its heat resistance and deformation! Excellent adhesion and weather resistance: It has excellent adhesion and can be almost glued at room temperature. Special types of sealants also do not have mold or stick.
The use of silicone sealant is usually discussed by everyone, and it is commonly used!
Commonly used silicone sealants include oil in water type, silicone sealant, silicone sealant for silicone, solvent type, oil in water type, water-based silicone sealant, organic silicone materials, and so on.
The use of silicone sealant is not suitable for sealing, such as when pouring on internal and external walls, it is necessary to choose aging resistance, and organic silicone sealant cannot be used. Silicone sealant cannot truly achieve the adhesion, joint peeling, and bonding strength of the sealant. Although this product has good performance, long-term use may cause deformation and failure, such as uneven curing of sealant, poor weather resistance, poor heat generation, long-term use may cause segregation, and in some cases, curing with sealant may not achieve sealing effect.
-Adjusting the curing time appropriately (fixed or fixed) can improve fluidity. In addition, polar materials can be added, which have poor sealing properties, are not easy to stick, and are not easy to clean. The greater the extrusion or tension, the poorer the thickness, viscosity, thixotropy, and surface finish of the substrate surface. Some materials may not have a smooth surface, similar to rubber, which is difficult to clean.
-When curing, we often choose to use the T-bond between sus-Na and other materials. The added air is very light, resulting in strong adhesion and poor viscosity.
Be sure to use a stirring rod (with a speed of 80 mesh), especially for high viscosity silicone oil with a stirring length. When using, do not exceed the weight and also stir. Physical cleaning requires immediate use. High viscosity silicone oil should not exceed: 141b, aluminum hydroxide, magnesium hydroxide, zirconium hydroxide, molybdenum chromium red, cobalt blue, cadmium yellow, etc; Compared to alkaline adhesives, the stirring performance is better.
High viscosity silicone oil is a combination of some methyl groups of dimethyl silicone oil and polysiloxanes, which can be used for various textile finishes, including low-temperature applications as gelling agents and fabric finishing agents. Organize fabrics to increase their softness and brittleness, improve their tear strength and wrinkle resistance, and enhance their wear resistance, washing resistance, and electrical insulation properties. Coarse and soft silicone oil: 32kg, room temperature vulcanized silicone rubber: 9kg, dimethyl silicone oil: 20kg, 200kg.