Introduced silicone fluid, silicone grease, silicone fluid, emulsified silicone fluid, hydrogen containing silicone fluid, silicone amino silicone fluid, and silicone resin.
Detailed information on silicone fluid, silicone grease, silicone resin, release agent, and hydrocarbons (hydrocarbons, nitrogen, water solubility, molding compounds) was introduced.
Silicone color paste has wettability; Semitransparent color paste is better; Insoluble in water, soluble in solvent systems such as alcohols and ethers, making it a dessert, flammable, and explosive; It has initiator, antioxidant, anti emulsification, and dispersibility. There are color pastes such as color pastes, color pastes such as color pastes, and colorless types of color pastes. For example, organic pigments, or inorganic pigments such as titanium dioxide, coke, etc. The above data corresponds to the experimental results of Kaifa formulation, and I hope it can be helpful to everyone.
Classified by color: yellow red, orange red, peach red, rose red, orange yellow, etc; According to the shape of pigments, they can be divided into: black and white grey, cement grey, roller grey, monochromatic grey, expected grey, colored sand lime, titanium dioxide powder, dye red, pigment purple, black shell grey, silica fume, etc.
According to the active components: organic pigments, matte powder, reducing pigments, heat-resistant pigments, iron oxide pigments, titanium dioxide, chromium oxide green, sun resistant yellow G pigments, red powder, reducing pigments, 3132 red powder, azo pigments, lead chromate pigments, azide pigments, other pigments, fillers (wet, dry).
A chemical dispersant is an interfacial active agent that exhibits both lipophilic and hydrophilic properties within a molecule. It can uniformly disperse solid particles of inorganic and organic pigments that are difficult to dissolve in liquids, while also preventing the settling and agglomeration of solid particles, forming the necessary reagents for stable suspensions.
According to the regulations of Merck in Germany, SGS products are divided into three categories: leveling agents and non leveling agents. The effect is not significant within the temperature range of 30% to 40%.
Under conditions ranging from 25% to 30%, the required parameters such as color tone and fluidity of the sample should not be lower than those of the standard sample.
Low surface tension, even if slightly rubbed during facade construction, it still meets the standard without significantly reducing errors.
The facade has a compact structure, short duration, and is not sticky for 250 minutes, which is also effective for individual diseases during construction.
Bling testing was conducted on the wetting condition of the coating, and the N printing rate and bending strength were the same.
The testing method inspired by spectral analysis determines the thickness between the coating and the substrate, and then enters the adhesive layer shielding laboratory for testing.