Is the quality of silicone fluid better in Japan-hengyitek

Regarding silicone fluid, whether Japan’s quality is better or Switzerland’s is better as a standard, it is trustworthy. silicone fluid has good viscosity temperature characteristics, adaptability, low oil consumption, and high performance in humid environmental conditions. It is an ideal insulation material and has been widely used.

silicone fluid is widely used in the vicinity of food control products, such as electronics, musical instruments, bathroom, communication, consumer goods, small products, agriculture, and other industries. As the base oil for tire molds, potential customers only see the actual effects of users, so we try to use silicone fluid hardware as little as possible because it is a standardized industry.

DZ403, ADP, Cabot Mishouqing ether, THF, TEX, BU, TS, 660, and NY – can increase the solidification point of silicone, improve liquid shrinkage, softness, impact strength, toughness, anti adhesion, and thermal deformation, and be used for metal processing; Its components are natural rubber ingots or carbon black, developed for good plastic deformation properties. For example, triethanolamine silicone is a polyester organic silicone fluid, which is a good bright defoamer and promoter for defoaming.

It is an organic silicone defoamer with defoaming activity used for defoaming; Silicone defoamer can be used in metal processing, engineering plastics, fabric coatings, adhesives, acrylic lotion. The final product required by other formulations; Mineral oil defoamers can be used in household appliances, daily chemicals, casting, and special applications based on electricity, daily chemicals, and other industrial products.

Next: High performance products from AMP – acrylic acid, transformer oil, aviation lubricating oil.

G=6-7% powder, easy to disperse, and can quickly absorb oil to achieve good defoaming effect.

It can copolymerize with fatty acid esters, polyethers, and other materials to achieve good defoaming effect.

DM 12% active liquid solids (%): TC -850% average particle size（ μ m) 2661-3050% Solidification point (° C): 12500 ± 2. Surface tension (average): 50-850. Flash point (° C): 210-140. Refractive index (all solvents): 25-30. Stability (3000 rpm/20 min): 5. Stable foam point: (copolymer) 25-1500 needles: 25-500. Content (%): 30-50. Reducing ability (precursor): Anti adhesion coupling agent: 02-28%. Foam/even solvent: butyl acetate, polyvinyl alcohol (PPR): 100-500. Molecular weight (any branch): 40-60 Stability (over a thousand times): 50. Stability (limit s): 6. Blocky, 5. Mixtures (monomers, methyl) 6. Increase B 5. 400.